Description
Sikadur® Injection Gel, Standard Set is a 2-component, 100 % solids, moisture-tolerant, high-modulus, highstrength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-C and AASHTO M-235 specifications.
FEATURES
- Unique, non-abrasive texture permits application with automated pressure-injection equipment.
- Tolerant of moisture before, during, and after cure.
- High-modulus, high-strength, structural-paste adhesive.
- Excellent adhesion to masonry, concrete, wood, steel and most structural materials.
- Paste consistency ideal for vertical and overhead grouting of cracks.
- Convenient easy mix ratio A:B = 1:1 by volume.
- Excellent lubricity for deep penetration.
- Sikadur Injection Gel fast set is approved for short term loads only. Consult a design professional prior to use.
USES
- Structural crack repairs not exceeding 1/4 in. (6 mm) width.
- Mechanical grouting. . . bolts, dowels, pins, machine and ‘robotic’ base plates, bearing pads, etc.
- Waterproofing tunnels, cable vaults, tanks, basements, etc.
- Re-anchoring of veneer masonry. Consult a design professional prior to use.
- Wood-truss repairs.
- Preventive maintenance - grout large cracks on new or existing structures to seal off reinforcing steel from the elements of corrosion.
- Anchor grouting . . . bolts, dowels, pins and special fasteners. Consult a design professional prior to use.
- As a pick-proof sealant around windows, doors, lock-ups, etc. inside correctional facilities.
Additional Information
Shelf Life: |
24 months in original, unopened container |
Storage Conditions: |
Store dry at 40–95 °F (4–35 °C). Condition material to 65–75 °F (18–24 °C) before using. |
