Created with Sketch. Created with Sketch.

Anchoring and Fasteners

  • 1/2"-13 Drop-In Anchor - 50 Pack

    1/2"-13 Drop-In Anchor - 50 Pack

    Drop-in anchors for use in pipe hanging, mounting valve and pipe, machinery mounting, anchoring shelf, and insulation applications, in concrete materials or solid concrete base materials. FEATURES Non-Flange Steel Zinc Plated 2" L x 5/8" Diameter

  • 1/4"-20 Drop-In Anchor - 10 Pack

    1/4"-20 Drop-In Anchor - 10 Pack

    Drop-in anchors for use in pipe hanging, mounting valve and pipe, machinery mounting, anchoring shelf, and insulation applications, in concrete materials or solid concrete base materials. FEATURES Non-Flange Steel Zinc Plated 1" L x 3/8" Diameter

  • Cushion Clamp - 7/8"

    Cushion Clamp - 7/8"

    CS Industrial cushion clamps are made by stamping from low carbon strip steel. The steel is zinc plated with a yellow di-chromate anti corrosion treatment. Our zinc plating conforms to a G-90 thickness designation per ASTM A653. These clamps are well...

  • #506 3/8" Heavy Duty T50 Staples - 1250 pack

    Heavy Duty T50 Staples - 1250 pack

    506™ Compatible Tools:T50, T50HS, 5700, T50R.E.D., T50X, T50PBN, HT50, HT55, T50ACD, T50DCD, T50AC, PT50 3/8" (10mm) Material: Steel 508™ Compatible Tools:T50, T50HS, 5700, T50X, T50R.E.D., T50PBN, HT50, T50ACD, T50DCD, T50AC, PT50 1/2"...

  • Manual Epoxy Dispensing Tool for 22 oz. Cartridges

    Manual Epoxy Dispensing Tool for 22 oz. Cartridges

    Our heavy-duty tools are designed to work with our cartridges for trouble-free dispensing. Each manual tool provides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive. The EDT22S epoxy adhesive tool features a steel carriage and is...

  • Nylon Hole-Cleaning Brush

    Nylon Hole-Cleaning Brush

    Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie® SET-XP®, AT-XP®, ET-HP®, AT and SET adhesives. FEATURES Twisted...

  • SET-XP22 High-Strength Epoxy Adhesive - 22 oz

    SET-XP22 High-Strength Epoxy Adhesive - 22 oz

    SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the...

  • 1-5/8" x 1-5/8" , 12 GA, Slotted Strut Channel - Sold per Foot

    Slotted Strut Channel - Sold per Foot

    CS Industrial pre-galvanized channels are cold roll formed to size from low-carbon strip steel. Our pre-galvanized steel is zinc coated through a hot dip process. Large coils of steel strip are fed through a continuous zinc coating machine which cleans,...

  • Solid Strut Channel 13/16" x 1-5/8" x 10' - Sold per Foot

    Solid Strut Channel 13/16" x 1-5/8" x 10' - Sold per Foot

    CS Industrial pre-galvanized channels are cold roll formed to size from low-carbon strip steel. Our pre-galvanized steel is zinc coated through a hot dip process. Large coils of steel strip are fed through a continuous zinc coating machine which cleans,...