Description
The 18V LXT® Lithium-Ion Cordless ½” Hammer Driver-Drill (model XPH07Z) breaks new ground with a full 1,090 in.lbs. of torque for the most demanding drilling and driving applications in wood, masonry and metal. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. The XPH07Z is positioned at the top of Makita’s deep line-up of driver-drills, and is a workhorse tool engineered with durability features for operation in harsh job site conditions.
FEATURES
- XPH07Z is a brushless hammer drill/driver tool only. Batteries and charger sold separately
- Driver mode for driving screws
- 5.9lbs with battery attached (battery not included)
- 8-1/8 In. long
- Brushless motor has longer lifespan than traditional brushed tools
- Drills in wood, metal, or masonry
- Included depth gauge prevents over-drilling
- Reversable belt clip for convenience while working
- Battery fuel gauge on tool
- Soft rubber handle is comfortable while in use
- Computer controls prevents the tool from overloading and overheating
- 1,090 In.-lbs of torque
- Works with the entire line of Makita 18V Lithium-Ion slide-style batteries
- Tool covered under warranty for 3 years
- 2 speeds (550 RPM / 2,100 RPM)
- 8,250 BPM in low speed, 31,500 BPM in high
- Side handle included
- 1/2 In. keyless chuck
- Three settings for different uses
- Hammer mode for concrete and masonry
- Drill mode for metal or wood
Additional Information
Capacity (steel): |
1/2" |
Capacity (wood): |
3" |
Capacity (masonry): |
5/8" |
No Load Speed (var. 2 spd): |
0 - 550 / 0 - 2,100 RPM |
Blows Per Minute (2 speed): |
0 - 8,250 / 0 - 31,500 BPM |
Maximum Torque (in.lbs./N•m): |
1,090 in.lbs./125N•m |
Battery: |
18V LXT® Lithium-Ion |
Overall Length: |
8-1/8" |
Net Weight (with battery): |
5.9 lbs. |
LED light: |
Yes |
Power Type: |
Cordless |
Form Factor (LXT): |
18V LXT® |
Motor Type: |
Brushless |
Shipping Weight: |
6.3 lbs |