Description
SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.
Key Features
- 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
- Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
- Code-listed equivalent to cast-in-place reinforcing bars governed by ACI 318 and IBC Chapter 19
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Cure times: 24 hours at 70°F (21°C), 72 hours at 50°F (10°C)
- Easy hole-cleaning — no power-brushing required
- Suitable for use in dry or water-saturated concrete
- For best results, store between 45°F (7°C) and 90°F (32°C)
- Available in 8.5 oz., 22 oz. and 56 oz. cartridges for application versatility
- Manufactured in the USA using global materials
- SET-XP is code listed for installation with the Speed Clean™ DXS drill bits without any further cleaning (ICC-ES ESR-2508)
- Tested per ACI 355.4 and AC308
Documentation
